HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, and b180 - Page 170
Disconnecting the Storage Tray Assembly
View all HP Visualize b180L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Changing Your Workstation's Hardware Configuration Replacing the Battery 3 Disconnect the cables from the system board and the optional fast, wide SCSI adapter, as shown in Figure 58. When disconnecting the floppy cable use the following procedure: a Lift the locking ring on the connector to the up, or unlocked position. b While holding the locking ring in the unlocked position, pull the cable out of the connector. 4 Remove the storage tray retaining screw, as shown in Figure 58. FWSCSI Storage Tray SESCSI Power CD Audio Floppy Connector Figure 58 Disconnecting the Storage Tray Assembly 156
156
Changing Your Workstation’s Hardware Configuration
Replacing the Battery
3
Disconnect the cables from the system board and the optional fast, wide SCSI
adapter, as shown in Figure 58.
When disconnecting the floppy cable use the following procedure:
a
Lift the locking ring on the connector to the up, or unlocked position.
b
While holding the locking ring in the unlocked position, pull the cable out of
the connector.
4
Remove the storage tray retaining screw, as shown in Figure 58.
Figure 58
Disconnecting the Storage Tray Assembly
Floppy Connector
SESCSI
Storage Tray
CD Audio
Power
FWSCSI