HP dc73 Service Reference Guide - HP Compaq dc7800 Business PC - Page 149
If installing a second hard drive, connect the power and data cables to the rear of the drive
View all HP dc73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
3. Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward the front of the computer until it locks into place. 4. Connect the appropriate drive cables: a. If installing a diskette drive, connect the power and data cables to the rear of the drive and connect the other end of the data cable to the connector on the system board labeled FLOPPY. b. If installing a second hard drive, connect the power and data cables to the rear of the drive and connect the other end of the data cable to the next available (unpopulated) SATA connector on the system board by following the numbered sequence of the connectors. c. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA. Drives 137