Hitachi C4K60 Specifications - Page 120
SMART Write Log Sector [B0h, Sub D6h], 5.53. Standby [96h, E2h]
UPC - 683728199449
View all Hitachi C4K60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
7.5.52. SMART Write Log Sector [B0h, Sub D6h] Task File Registers Command LBA High LBA Mid LBA Low Device/Head Sector Count Features 7 6 5 4 3 2 1 0 B0h C2h 4Fh Log Address X X X DRV X X X X Number of sector to be written D6h The SMART WRITE LOG SECTOR Command writes an indicated number of 512 byte data sector to the indicated log sector. Host vendor specific logs are used by the host to store any data desired using the SMART Write LOG SECTOR command. LBA Low (Sector Number) Register indicated the log to be written as described in Table 7.11. If the host attempts to write to a read only log address, the device returns command aborted. 7.5.53. Standby [96h, E2h] Task File Registers Command LBA High LBA Mid LBA Low Device/Head Sector Count Features 7 6 5 4 3 2 1 0 96h or E2h XX XX XX X X X DRV X X X X Standby Timer Value XX The STANDBY command causes the device to enter the Standby mode. The Sector Count Register sets the standby timer value (Refer to Table 7.10). By the power on default, the Standby timer is disabled. K6610170 Rev.2 Dec 22, 2004 - 120 -