Hitachi C4K60 Specifications - Page 28
Connector Specification, Connector Pin Assignment
![]() |
UPC - 683728199449
View all Hitachi C4K60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6.2.2. Connector Specification (1) Connector vender / model : JAE(Japan Aviation Electronics Industry, Ltd.) / type FA5B040HP1(Gold plate contact). Please search from http://www.jae-connector.com/en/. (2) Gold plate on FPC contact is recquired to avoid Sn whisker completely. (3) 20.5 +/- 0.05mm width, 0.3 +/- 0.05mm thickness FPC with reinforcement is recommended. (4) 2-layer FPC(one layer is GND plane) is recommended for better signal integrity. (5) Durability is 20 times with the same connector and FPC. (6) FPC holding force is min. 8.0N. Please secure appropriate margin in the FPC length not to apply excessive force on shock. 6.2.3. Connector Pin Assignment pin signal name 1 factory use 2 factory use 3 RESET4 GROUND 5 DD7 6 DD8 7 DD6 8 DD9 9 DD5 10 DD10 Table 6.1 Connector pin assignment pin signal name 11 DD4 12 DD11 13 DD3 14 DD12 15 DD2 16 DD13 17 DD1 18 DD14 19 DD0 20 DD15 pin signal name 21 GROUND 22 DMARQ 23 GROUND 24 DIOW25 DIOR26 GROUND 27 IORDY 28 GROUND 29 DMACK30 INTRQ pin signal name 31 DA1 32 PDIAG33 DA0 34 DA2 35 CS036 CS137 DASP38 3.3V 39 3.3V 40 DEVADR K6610170 Rev.2 Dec 22, 2004 - 28 -
![](/manual_guide/products/hitachi-c4k60-specifications-919096c/28.png)