IBM 4247-003 Maintenance Manual - Page 133

MAPs Reference Tables Reference Table 1, Model A00 Error Messages Table 17. Model A00 Error Messages Message Description Action 01 END OF FORMS Forms do not load when Load/Form Feed See "MAP 0130: No Paper Movement" on key is pressed. page 62. No forms movement. 01 END OF FORMS Forms are visible between the printhead See "MAP 0131: Paper Path Sensor" on and the platen. page 66. Forms path sensor cannot sense paper. 02 FORMS JAM CHECK PATH A forms jam was detected by one of the forms sensors. See "MAP 0110: Automatic Sheet Feeder" on page 26. ASF paper path LED flashes 02 FORMS JAM CHECK PATH A forms jam was detected by one of the forms sensors. See "MAP 0190: Form Feed Problems" on page 101. Any paper path LED except ASF flashes 11 LOAD BIN 1, 2, or 3 False message Paper begins to feed from any bin, but stops. Rear (under platen) path sensor cannot sense paper. See "MAP 0131: Paper Path Sensor" on page 66. 20 DSR ERROR CHECK INTF Host DATA SET READY signal not sensed See "MAP 0120: Parallel or Serial by the serial interface. Attachment, Model A00 and Model 003" on page 33. Chapter 1. Diagnosing Problems 133