IBM 4247-003 Maintenance Manual - Page 66

MAP 0131: Paper Path Sensor Symptom Explanation 01 END OF FORMS 001 END OF FORMS 11 LOAD BIN 1, 2, or 3 011 CHECK/LOAD BIN 1, 2, or 3 031 END OF FORMS TIMEOUT Suspected FRUs/Causes Paper sensor failure Logic board Sensor cable assembly Table 9. MAP 0131: Paper Path Sensor Step Questions/Actions Yes 1. Try to load forms from the failing forms path. Go to step 2. Does the form load, and is it visible between the printhead and the platen? 2. Are you trying to load black back forms? Go to step 3. 3. Black back forms will not work in all forms paths, and Black back forms will not work can cause false forms path sensor errors. in the front push, rear pull, or push-pull forms paths. Are you trying to load black back forms in the front push, rear pull, or push-pull forms paths? Select another forms path. No You are in the wrong MAP. Return to "MAP 0100: START OF CALL" on page 23. Go to step 4 on page 67. Go to step 4 on page 67. Chapter 1. Diagnosing Problems 66