IBM 4247-003 Maintenance Manual - Page 137

Table 18. Error Messages for Models 001, 002, and 003 (continued) Message Description Action 007 INCORRECT PRINT ORDER Invalid order received from host. Press Stop, then Start. PRESS STOP THEN START (Coax interface only) 008 HOLD PRINT TIMEOUT PRESS STOP THEN START Start key not pressed within 10 minutes of Press Stop, then Start. pressing Stop. (Coax interface only) 011 CHECK/LOAD BIN 1, 2, or 3 False message Paper begins to feed from any bin, but stops. Forms path sensor cannot sense paper. See "MAP 0131: Paper Path Sensor" on page 66. 014 INVALID FORMS SELECT/FORM NAME SELECT NEW DEVICE Printer received a request for forms type not supported in current forms configuration. (Message and form name alternate on the first line of the display) Perform one of the following: v Restart job. v Cancel job. v Select another source and restart the job. v Run the job with current source. Refer to a 4247 User's Guide for more detail. 015 COMMUNICATIONS CHECK CHECK CABLE (Twinax interface only) No line sync detected on the twinax interface. Error automatically resets when line sync is detected. See "MAP 0121: Parallel with Twinax or Coax Attachments, Models 001, 002, or 003" on page 41. 017 COMMUNICATIONS CHECK (Twinax interface only) Line parity error detected. See "MAP 0121: Parallel with Twinax or Coax Attachments, Models 001, 002, or 003" on page 41. Chapter 1. Diagnosing Problems 137