IBM 4247-003 Maintenance Manual - Page 139

Table 18. Error Messages for Models 001, 002, and 003 (continued) Message Description Action 032 FORMS JAMMED TIMEOUT CLEAR JAM AND RELOAD FORMS (Coax interface only) 002 FORMS JAMMED FRONT TRACTOR or 020 FORMS JAMMED REAR TRACTOR condition exceeded 60 seconds. See "MAP 0190: Form Feed Problems" on page 101. Jam detected at the front or rear tractor jam sensor. 033 TEAR PAPER TIMEOUT TEAR OFF AT OUTPUT AND PRESS PARK (Coax interface only) 091 FANFOLD PARK condition exceeded 60 seconds. 1. Tear off paper after exit from the printer. 2. Press Park to allow operation to complete. 034 INVALID FORMS SELECT TIMEOUT/FORMS NAME 014 INVALID FORMS SELECT condition exceeded 60 seconds. SELECT NEW DEVICE (Coax interface only) (Message and form name alternate on the first line of the display) Perform one of the following: v Restart job. v Cancel job. v Select another source and restart the job. v Run the job with current source. Refer to a 4247 User's Guide for more detail. 035 MARGIN ERROR TIMEOUT ADJUST MARGIN OR LINE LENGTH 005 MARGIN ERROR condition exceeded Press Stop, then Start. Left margin value 60 seconds. will be reset to 10 for current line only. (Coax interface only) 036 TEAR PAPER TIMEOUT 092 FANFOLD EJECT condition exceeded 60 seconds. TEAR OFF AT INPUT AND PRESS EJECT (Coax interface only) Tear off paper before entering the printer and press Eject to allow operation to complete. Chapter 1. Diagnosing Problems 139