IBM 4247-003 Maintenance Manual - Page 143

Table 18. Error Messages for Models 001, 002, and 003 (continued) Message Description Action 098 HOLD PRINT TIMEOUT PRESS LOAD 003 FORMS EJECTED condition exceeded Press Load. 60 seconds. (Coax interface only) 099 FORMS JAMMED CLEAR JAM THEN PRESS START Paper still present after attempted Park or See "MAP 0110: Automatic Sheet Feeder" Eject. on page 26. (ASF paper path) 099 FORMS JAMMED CLEAR JAM THEN PRESS START (All other paper paths) Path sensor sensed paper still present 1. Ensure fanfold forms are torn off after attempted Park or Eject. For fanfold before parking the forms. forms, this message can display if you park 2. Ensure fanfold forms are loaded onto but do not tear off the output. the tractor pins, with the leading edge visible on the tractor. Path sensor detected forms already 3. Check for pieces of paper in the present when you tried to load forms into a manual sheet feed, under the platen, fanfold path. and above the front tractor. 4. If message remains, see "MAP 0190: Form Feed Problems" on page 101. 200 ATTACHMENT INCOMPATIBLE MODEL 003 SEE USER'S GUIDE Installed attachment card is not compatible Printer base code must be reloaded for the with the printer base code loaded. installed attachment card, see Appendix C. The coax attachment card is missing, install a coax card. Flashing the Memory of the Model 003, or change the attachment card to the correct type. See Model 003 Attachment Cards: Serial, Twinax, LAN, Coax. For details about base code compatibility, see Reference Table 9, Base Code Compatibilities. Chapter 1. Diagnosing Problems 143