IBM 4247-003 Maintenance Manual - Page 136

Table 17. Model A00 Error Messages (continued) Message Description JUMPER AND KEYS Manufacturing use only. Action 1. Remove the jumper from the bottom of the operator panel. 2. Install a new EMI filter assembly (used only with early-level logic boards). See "EMI Filter (Model A00 Early-Level Logic Board Only)" on page 377. 3. Install a new operator panel. See "Operator Panel" on page 355. 4. Install a new operator panel cable. 5. Install a new logic board. See "Logic Board - Model A00" on page 370. Reference Table 2, Models 001, 002, and 003 Error Messages Table 18. Error Messages for Models 001, 002, and 003 Message Description Action 001 END OF FORMS Forms do not load when Load/Eject is pressed. See "MAP 0130: No Paper Movement" on page 62. No forms movement. 001 END OF FORMS Forms are visible between the printhead See "MAP 0131: Paper Path Sensor" on and the platen. page 66. Forms path sensor cannot sense paper. 002 FORMS JAMMED FRONT TRACTOR Jam detected at the front tractor sensor. CLEAR JAM AND RELOAD FORMS See "MAP 0190: Form Feed Problems" on page 101. 005 MARGIN ERROR ADJUST MARGIN OR LINE LENGTH Left margin incorrect. Press Stop, then Start. Left margin value will be reset to 10 for current line only. Chapter 1. Diagnosing Problems 136