IBM 7014-T42 User Guide - Page 17
Thin washers, Rack-mounting bolts
View all IBM 7014-T42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1 Rack chassis 2 Top trim panel 3 Left-side trim panel 4 Right-side trim panel 5 Spring clip Figure 4. Removing the trim panels 3. If they are installed, remove the front and rear doors. After the rack doors have been removed, go to the next substep. To remove a rack door, complete the following steps: a. Unlock and open the door. b. Grasp the door firmly with both hands and pull it away from the hinges. 4. Locate the hardware mounting kit and the two mounting plates. Refer to the following illustration when reviewing the contents of the hardware mounting kit. The hardware mounting kit contains the following items: v 4 Rack-mounting bolts v 4 Thin washers v 8 Plastic isolator bushings v 4 Thick washers v 4 Spacers 5. If you are installing an ac-powered rack, temporarily install the lower plastic isolator bushings to help you locate the mounting locations for the stabilizer bracket. After the stabilizer bracket has been Racks and rack features 5