IBM 88631SU Service Guide - Page 103
parameters.
UPC - 000435913135
View all IBM 88631SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, Type 8863, 7362," on page 107 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)", that step must be performed only by a trained service technician. Error code Description Action 215-xxx-000 Failed CD or DVD test. 1. Run the test again with a different CD or DVD. 2. Reseat the following components: a. CD or DVD drive b. Front panel assembly 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. CD or DVD drive b. (Trained service technician only) Front panel assembly 217-xxx-000 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 1. 217-xxx-001 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 2. 217-xxx-002 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 3. 217-xxx-003 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 4. 217-xxx-004 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 5. 217-xxx-005 Failed BIOS fixed disk test. Note: If RAID is configured, the fixed disk number refers to the RAID logical array. Reseat and, if necessary, replace hard disk drive 6. 217-198-xxx Could not establish drive parameters. 1. Check the drive cables and terminators. 2. Reseat and, if necessary, replace the hard disk drive. 301-xxx-000 Failed keyboard test. Note: After installing a USB keyboard, you might have to use the Configuration/Setup Utility program to enable keyboardless operation and prevent the POST error message 301 from being displayed during startup. 1. Reseat the following components: a. Keyboard b. I/O board 2. Replace the components listed in step 1 one at a time, in the order shown, restarting the server each time. 302-xxx-xxx Failed mouse test. 1. Reseat the following components: a. Mouse b. I/O board 2. Replace the components listed in step 1 one at a time, in the order shown, restarting the server each time. Chapter 2. Diagnostics 87