IBM JS20 User Guide - Page 49
Starting, management, configuration, program, module, Connecting, through, directly, connected,
![]() |
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
v Before you can run programs on the blade server, you must install an operating system on the blade server. For information about installing the operating system, see Chapter 6, "Installing the operating system," on page 45. v Throughout this document, the management-module Web-based user interface is also known as the BladeCenter management-module Web interface. v Throughout this document, the user name is also known as the user identifier or user ID for logging onto the management module. Starting the management and configuration program in the management module Use the management-module Web-based management and configuration program for: v Configuring the BladeCenter unit to operate using SOL v Updating and configuring BladeCenter components for SOL operation Complete the following steps to start the Web-based management and configuration program. (For additional information, see the BladeCenter unit Installation and User's Guide.) 1. Open a Web browser. In the address or URL field, type the Internet protocol (IP) address or host name that is assigned for the management-module remote connection. The default IP address is: 192.168.70.125 The Enter Network Password window opens. 2. Type your user name and password. Before you log onto the management module for the first time, contact your system administrator regarding whether your organization has assigned a user name and password to you. Use the initial (default) user name and password the first time that you log onto the management module. If you have an assigned user name and password, use them for all subsequent logins. All login attempts are documented in the event log. The initial user ID and password for the management module are: v User ID: USERID (all capital letters) v Password: PASSW0RD (note the number zero, not the letter O, in PASSW0RD) 3. Follow the instructions that appear on the screen. Be sure to set the timeout value that you want for your Web session. The BladeCenter management and configuration window opens. Connecting to the management module through a directly connected computer The computer that you are connecting to the management module must be configured to operate on the same subnet as the BladeCenter management module. If the IP address of the management module is outside of your local domain, you must change the Internet protocol properties on the computer that you are connecting. To access the management model through a direct-attached computer after initial BladeCenter installation and configuration, complete the following steps: Chapter 5. Configuration requirements for the blade server 37
![](/manual_guide/products/ibm-js20-user-guide-5dc2616/49.png)