IBM JS20 User Guide - Page 52
Updating, firmware, blade, server, service, processor, Determining, current, levels
![]() |
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5. From the Main Menu, select option 2 (Select Media Adapter). After you make this selection, a wait message is displayed, followed by the Select Media Adapter menu. 6. From the Select Media Adapter menu, select the Fibre Channel adapter. After you make this selection, a wait message and several additional messages are displayed, followed by the Select Device menu. 7. From the Select Device menu, select the Fibre Channel device that you want to set as the boot device. After you make this selection, the Select Task menu is displayed. 8. From the Select Task menu, select normal boot mode. (This creates an ibm,fw-fcpdisk alias in the /aliases node.) After you make this selection, the command prompt appears. 9. Restart the blade server. For additional information about setting up your system configuration for remote startup operations through Fibre Channel switch modules, contact the IBM technical support team. In the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378). In other countries, go to http://www.ibm.com/planetwide/ to locate your support telephone numbers. Updating the firmware code for the blade server and the service processor This section describes how to determine the current code levels for the blade server (system) firmware and Integrated Systems Management Processor (service processor). Information on how to validate, update and commit the system firmware is included. The blade server contains firmware code for the system and service processor. IBM will periodically make firmware updates available for the blade server and the service processor. You can maintain the latest levels of firmware code for the blade server and the service processor in the blade server by installing firmware updates as they become available. Be sure to follow the instructions in this section. Determining current blade server firmware code levels Complete the following steps to view the current firmware code levels for the blade server and the service processor: 1. Access and log onto the BladeCenter management-module Web interface as described in the BladeCenter unit Installation and User's Guide. 2. From the Blade Tasks section, select Firmware VPD. The Blade Server Firmware VPD window contains the build identifier, release, and revision. Compare this information to the firmware information on the IBM Support Web site at http://www.ibm.com/support. If these two types of information match, then the blade server has the latest firmware code. If these two types of information differ, download the latest firmware code from the IBM Support Web site. Follow the update instructions on the IBM Support Web site. Note: The firmware version displayed by the BladeCenter unit management module might be different from the version displayed by your operating 40 BladeCenter JS20 Type 8842: Installation and User's Guide
![](/manual_guide/products/ibm-js20-user-guide-5dc2616/52.png)