IBM x3500 User Guide - Page 17
Features, specifications - server specifications
UPC - 883436005760
View all IBM x3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Features and specifications The following information is a summary of the features and specifications of the server. Depending on the server model, some features might not be available, or some specifications might not apply. Table 1. Features and specifications Microprocessor: v Intel® Xeon™ dual-core or quad-core with 12 MB Level-2 cache Important: Do not use dual-core and quad-core processors in the same server. v Support for up to two microprocessors v Support for Intel Extended Memory 64 Technology (EM64T) Note: Use the Configuration/Setup Utility program to determine the type and speed of the microprocessors. Memory: v Minimum: 1 GB depending on server model, expandable to 48 GB v Type: 667 MHz, PC2-5300, ECC Fully Buffered DIMMs (FBD) with double data rate (DDR) II, SDRAM v Connectors: Twelve 240-pin dual inline memory module (DIMM) connectors Drives: v IDE: - DVD (standard) - CD, CD-RW, DVD/CD-RW (optional) - Maximum of two devices can be installed v Diskette (optional): External USB 1.44 MB v Supported hard disk drives: - Serial Attached SCSI (SAS) - Serial Advanced Technology Attachment (SATA) Expansion bays: v Eight hot-swap SAS, 3.5-inch bays or 12 hot-swap SAS, 2.5-inch bays v Three half-high 5.25-inch bays (DVD drive installed) Note: Full-high devices such as an optional tape drive will occupy two half-high 5.25-inch bays. PCI and PCI-X expansion slots: v Six PCI expansion slots - Three PCI Express x8 (two x8 links and one x4 link) - One PCI 33 MHz/32-bit - Two PCI-X 2.0 133 MHz/64-bit slots Upgradeable microcode: System BIOS, service microprocessor, BMC, and SAS microcode Power supply: Note: To upgrade to two 835-watt hot-swap power supplies, install the redundant power and cooling option kit. Kit includes one 835-watt power-supply and three hot-swap fans. v Standard: One 835-watt 110 V or 240 V ac input dual-rated power supply v Upgradeable to two 835-watt hot-swap power supplies Hot-swap fans: v Three (standard) v Upgradeable to six fans (for redundant cooling) Note: To upgrade to redundant cooling, install the redundant power and cooling option kit. Kit includes one 835-watt hot-swap power-supply and three hot-swap fans. Size: v Tower - Height: 440 mm (17.3 in.) - Depth: 747 mm (29.4 in.) - Width: 218 mm (8.6 in.) - Weight: approximately 38 kg (84 lb) when fully configured or 20 kg (42 lb) minimum v Rack - 5U - Height: 218 mm (8.6 in.) - Depth: 696 mm (27.4 in.) - Width: 424 mm (16.7 in.) - Weight: approximately 34 kg (75 lb) when fully configured or 20 kg (42 lb) minimum Racks are marked in vertical increments of 4.45 cm (1.75 inches). Each increment is referred to as a unit, or "U." A 1-U-high device is 4.45 cm (1.75 inches) tall. Integrated functions: v Baseboard management controller (Intelligent Platform Management Interface (IPMI) 2.0 compliant) v Service microprocessor support for Remote Supervisor Adapter II SlimLine v Light path diagnostics v ServeRAID-8k (512 MB with battery backup) and ServeRAID-8s SAS Controllers support RAID levels 0, 1, 1E, ,10, 5, 6, 50, and 60 Note: The server will not start without a RAID controller installed. - Eight 3.5-inch hard disk drive models: ServeRAID-8k-l or ServeRAID-8k - Twelve 2.5-inch hard disk drive models: ServeRAID-8k and ServeRAID-8s v Four Universal Serial Bus (USB) ports (2.0) - Two on rear of server - Two on front of server v Broadcom 5721 and 5721KFB3 10/100/1000 Gigabit Ethernet controllers v ATI PCI ES1000 video - 16 MB video memory - VGA and SVGA compatible v ATA-100 single-channel IDE controller (bus mastering) v Vitesse VSC7250 SAS/SATA RAID controller v Mouse connector v Keyboard connector v Serial connector Acoustical noise emissions: v Sound power, idle: 5.5 bel declared v Sound power, operating: 6.0 bel declared Environment: v Air temperature: - Server on: 10° to 35°C (50.0° to 95.0°F); altitude: 0 to 2134 m (7000 ft) - Server off: -40° to 60°C (-40.0° to 140.4°F); maximum altitude: 2134 m (7000 ft) v Humidity: - Server on: 8% to 80% - Server off: 8% to 80% Heat output: Approximate heat output in British thermal units (Btu) per hour: v Minimum configuration: 2013 Btu per hour (590 watts) v Maximum configuration: 2951 Btu per hour (865 watts) Electrical input: v Sine-wave input (50-60 Hz) required v Input voltage low range: - Minimum: 100 V ac - Maximum: 127 V ac v Input voltage high range: - Minimum: 200 V ac - Maximum: 240 V ac v Approximate input kilovolt-amperes (kVA): - Minimum: 0.60 kVA - Maximum: 0.88 kVA Notes: 1. Power consumption and heat output vary depending on the number and type of optional features that are installed and the power-management optional features that are in use. 2. These levels were measured in controlled acoustical environments according to the procedures that are specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average stated values because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. Chapter 1. The System x3500 server 3