IBM x3500 User Guide - Page 85
Cabling, Remote, Supervisor, Adapter, SlimLine, Installing, firmware
UPC - 883436005760
View all IBM x3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
- Mozilla version 1.3 or later v If you plan to configure Simple Network Management Protocol (SNMP) trap alerts on the Remote Supervisor Adapter II SlimLine, install and compile the management information base (MIB) on your SNMP manager. v You will need an Internet connection to the client system to download software and firmware from the IBM Support Web site during the installation process. The Remote Supervisor Adapter II SlimLine firmware and the SNMP MIB are available on the ServerGuide Setup and Installation CD; the latest versions are available at http://www.ibm.com/systems/management/serverguide/sub.html. Cabling the Remote Supervisor Adapter II SlimLine You can manage the server remotely through the Remote Supervisor Adapter II SlimLine by using the dedicated system-management Ethernet connector on the rear of the server. For additional information about network configuration, go to the Remote Supervisor Adapter II SlimLine Installation Guide. Complete the following steps to cable the Remote Supervisor Adapter II SlimLine: 1. Connect one end of a Category 3 or Category 5 Ethernet cable to the dedicated systems-management Ethernet connector. See "Rear view" on page 10 for the location of the systems-management Ethernet connector. 2. Connect the other end of the cable to the network. Installing the Remote Supervisor Adapter II SlimLine firmware The software and firmware files that you need are contained in one system service package installation kit. The kit contains the following files: v Software and firmware installation instructions v BIOS code update with support for the Remote Supervisor Adapter II SlimLine v Diagnostics code update v Remote Supervisor Adapter II SlimLine device drivers v Remote Supervisor Adapter II SlimLine firmware update v Integrated service processor firmware update v Video device driver v Firmware-update utility program Complete the following steps to download and install the software and firmware. Note: Changes are made periodically to the IBM Web site. The actual procedure might vary slightly from what is described in this document. 1. Go to http://www.ibm.com/support/. 2. In the left navigation pane, click Downloads and drivers. 3. In the Search field, type Remote Supervisor Adapter II SlimLine firmware and click Search. 4. Select the system service package for the operating system that is running on the server in which the Remote Supervisor Adapter II SlimLine is installed. 5. Click the file link to download the system service package to d:\ibmssp, where d is the hard disk drive letter. (Create the directory if necessary.) 6. Extract the files into d:\ibmssp. See the readme.txt file, which is included with the extracted files, for a list of the files in the package. Chapter 3. Configuring the server 71