Intel S1200RP Service Guide - Page 130
Enabled, IPv6 Source, Dynamic, Static, Back to, Source, IP/IPv6 Source, BMC DHCP Host Name
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Server Utilities Option Values: [Entry Field 0000:0000:0000:0000:0000:0000:0000:0000, 0000:0000:0000:0000:0000:0000:0000:0000 is default] Help Text: View/Edit Gateway IPv6 address. Press to edit. Gateway IPv6 addresses consist of 8 hexadecimal 4 digit numbers separated by colons. Comments: This specifies the Gateway IPv6 Address for the Intel® RMM4 DMN LAN. There is a separate Gateway IPv6 Address field for the Baseboard LAN configuration. This option is only visible when the IPv6 option is set to Enabled. When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or can be edited (when Static). Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 18. IPv6 Prefix Length Option Values: [Entry Field 0 - 128, 64 is default] Help Text: View/Edit IPv6 Prefix Length from zero to 128 (default 64). Press to edit. Comments: This specifies the IPv6 Prefix Length for the Intel® RMM4 DMN LAN. There is a separate IPv6 Prefix Length field for the Baseboard LAN configuration. This option is only visible when the IPv6 option is set to Enabled. When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or can be edited (when Static). Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 19. BMC DHCP Host Name Option Values: [Entry Field, 2-63 characters] Help Text: View/Edit BMC DHCP host name. Press to edit. Host name should start with an alphabetic, remaining can be alphanumeric characters. Host name length may be from 2 to 63 characters. Comments: This field is active and may be edited whenever at least one of the IP Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from which dynamically assigned IPv4 or IPv6 addressing parameters are acquired. The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The user can edit the existing Host or enter a different DHCP Host Name. If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field will be grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 20. User ID Option Values: anonymous root User3 Intel® Server System P4000RP Family Service Guide 117