Intel S1200RP Service Guide - Page 97

NIC Configuration Screen, Advanced Screen, Screen Map

Get Intel S1200RP PDF manuals and user guides View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Server Utilities Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 5. iSCSI 1GbE/10GbE Option ROM Option Values: Enabled Disabled Help Text: Enable/Disable Onboard/IOM NIC iSCSI Option ROM Load. Comments: This selection is to enable/disable the iSCSI Option ROM that is used by all Onboard and IO Module 1 GbE and 10 GbE controllers. This option is grayed out and not accessible if the 1 GbE or 10GbE PXE Option ROM is enabled or if the 10 GbE FCoE Option ROM is enabled. It can co-exist with an InfiniBand controller Option ROM. If the iSCSI Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform a Network Boot and cannot respond for Wake-on-LAN. This iSCSI option does not appear unless there is an iSCSI -capable NIC installed in the system as an Onboard or IO Module NIC. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 6. Onboard NIC1 Type 7. Onboard NIC2 Type Option Values: One of these strings: Intel(R) I210 Dual-Port Gigabit Ethernet Controller Help Text: Comments: Information only. This is a display showing which NICs are available as Network Controllers integrated into the baseboard. Each of these Onboard NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. If a board only has one onboard NIC, the second NIC Type and following options section will not appear. If there is an InfiniBand controller integrated onboard, it will appear as NIC2. For details about the NIC hardware configuration for a specific board, refer to the Technical Product Specification for that board. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 8. IO Module 1 Type 9. IO Module 2 Type Option Values: One of these strings: 84 Intel® Server System P4000RP Family Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
Server Utilities
84
Intel
®
Server System P4000RP Family Service Guide
Back to [
NIC Configuration Screen
]
—
[
NIC Configuration Screen
]
—
[
Advanced Screen
]
—
[
Screen Map
]
5.
iSCSI 1GbE/10GbE Option ROM
Option Values:
Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC
iSCSI
Option ROM Load.
Comments:
This selection is to enable/disable the iSCSI Option ROM that is used by
all Onboard and IO Module 1 GbE and 10 GbE controllers.
This option is grayed out and not accessible if the 1 GbE or 10GbE PXE Option ROM is enabled or
if the 10 GbE FCoE Option ROM is enabled. It can co-exist with an InfiniBand controller Option
ROM.
If the iSCSI Option ROM is disabled, and no other Option ROM is enabled, the system cannot
perform a Network Boot and cannot respond for Wake-on-LAN.
This iSCSI option does not appear unless there is an iSCSI -capable NIC installed in the system as
an Onboard or IO Module NIC.
Back to [
NIC Configuration Screen
]
—
[
NIC Configuration Screen
]
—
[
Advanced Screen
]
—
[
Screen Map
]
6.
Onboard NIC1 Type
7.
Onboard NIC2 Type
Option Values:
<Onboard NIC Description>
One of these strings:
Intel(R) I210 Dual-Port Gigabit Ethernet Controller
Help Text:
<None>
Comments:
Information only
. This is a display showing which NICs are available as
Network Controllers integrated into the baseboard. Each of these Onboard NICs will be followed
by a section including a group of options that are specific to the type of NIC, either as an Ethernet
controller or an InfiniBand controller.
If a board only has one onboard NIC, the second NIC Type and following options section will not
appear. If there is an InfiniBand controller integrated onboard, it will appear as NIC2.
For details about the NIC hardware configuration for a specific board, refer to the Technical
Product Specification for that board.
Back to [
NIC Configuration Screen
]
—
[
NIC Configuration Screen
]
—
[
Advanced Screen
]
—
[
Screen Map
]
8.
IO Module 1 Type
9.
IO Module 2 Type
Option Values:
<IO Module Description>
One of these strings: