Intel S1200RP Service Guide - Page 26
Removing and Installing the System Side Cover
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Hardware Installations and Upgrades Removing and Installing the System Side Cover Removing the System Side Cover The Intel® Server System P4000RP family must be operated with the top cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components inside of the platform. Before removing the top cover, power down the server and unplug all peripheral devices and the AC power cable. NOTE A non-skid surface or a stop behind the chassis may be needed to prevent the chassis from sliding on your work surface. 1. Observe the safety and ESD precautions at the beginning of this manual. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord. 4. Remove the screws (see letter A). 5. Slide the side cover back (see letter B) and lift the cover outward to remove it. Figure 11. Removing the Side Cover Intel® Server System P4000RP Family Service Guide 13