Intel S1200RP Service Guide - Page 98
IntelR I540 Dual-Port X540 10 Gigabit RJ-45 Module
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Server Utilities Intel(R) I350 Quad-Port Gigabit Ethernet Module Intel(R) I540 Dual-Port X540 10 Gigabit RJ-45 Module Intel(R) 82599 Dual-Port 10 Gigabit SFP+ Module Mellanox* ConnectX-3* Single-Port InfiniBand FD14 Module Help Text: Comments: Information only. This is a display showing which Network Controllers on IO Modules are installed on the baseboard. Each of these IO Module NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. This descriptive screen image shows an example of an InifiniBand controller as IOM1. In a system with two IO Module connectors, an InfiniBand IO Module might be installed as either IOM1 or IOM2. Most boards have only one IO Module connector. In any case, an IO Module Type and following options section will only appear when an IO Module is installed, and a second IO Module Type and options section will only appear if there are two IO Modules installed. For details about the NIC hardware configuration for a specific board, refer to the Technical Product Specification for that board. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 10. NIC1 Controller 11. NIC2 Controller Option Values: Enabled Disabled Help Text: Enable/Disable Onboard Network Controller. Comments: This will completely disable Onboard Network Controller NIC1 or NIC2, along with all included NIC Ports and their associated options. That controller's NIC Ports, Port PXE options, and Port MAC Address displays will not appear. This option only appears for onboard Ethernet controllers. It does not appear for onboard InfiniBand controllers. Ethernet controllers on IO Modules do not have a disabling function that can be controlled by BIOS, so there is no corresponding controller enable/disable option for an IOM Ethernet controller. For details about the NIC hardware configuration for a specific board, refer to the Technical Product Specification for that board. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 12. NIC2 InfiniBand Option ROM 13. IOM1 InfiniBand Option ROM 14. IOM2 InfiniBand Option ROM Option Values: Enabled Disabled Help Text: Intel® Server System P4000RP Family Service Guide 85