Intel S1200RP Service Guide - Page 59
Removing and Installing the Chassis Feet
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Server Utilities 7. Push the backplane (see letter B) and secure the backplane with the screw (see letter C). Figure 70. Installing 8x3.5" Hot-swap Backplane 8. Install the 8x3.5" Hot-swap Hard drives cage. For instructions, see"Installing 8x3.5" Hotswap Hard Drive Cage". 9. Install the front bezel. For instructions, see "Installing the Front Bezel". 10. Install the chassis cover. For instructions, see Installing the System Side Cover. 11. Plug all peripheral devices and the AC power cable into the server. 12. Power up the server. Removing and Installing the Chassis Feet Removing the Chassis Feet 1. Observe the safety and ESD precautions at the beginning of this manual. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Lay the chassis down on its right side. 46 Intel® Server System P4000RP Family Service Guide