Intel S1200RP Service Guide - Page 39
Removing an Optical Drive
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Server Utilities 2. Get the two optical drive rails from chassis side (see letter B) and affix them to both optical drive sides, make sure the pinches on the optical drive rail are aligned with the alignment holes on the ODD (see letter C). 3. Insert the optical drive into chassis opening and push all the way until it stops (see letter D). 4. Connect the power and data cables to optical drive. Figure 34. Installing an Optical Drive Removing an Optical Drive 1. Remove the cables from optical drive. 2. Press the latching end of optical drive rails (see letter A) and pull the optical drive out (see letter B). 3. Remove the optical drive rail from the drive (see letter C). Figure 35. Remove an Optical Drive 4. Install the optical drive filler. Figure 36. Install optical drive filler 26 Intel® Server System P4000RP Family Service Guide