JVC GR-DVM70U Instruction Manual - Page 31
Select Operation Mode, Access Recording Menu, Access Mode Menu, Set Self-timer, Engage Self-timer - parts manual
UPC - 046838157424
View all JVC GR-DVM70U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Operation Switch A M START/STOP Button Lock Button /PCOFF CAME Power lamp PLAY RA5S DSC DS C PLAY MENU/SET Dial Display P. AE OFF / EFFECT FLASH ADJ. 0 4 TO MODE MENU END Power Switch Recording Menu GAIN UP AGC 4 SELF-TIMER ON FLASH AUTO TO DATE / TIME MENU TO SYSTEM MENU END - - - - -6- - - - - Mode Menu MANUAL PAUSE - - - Self-Timer indication Self-Timer EN31 Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture. 1 SELECT OPERATION MODE Set the Operation Switch to " ". Then, set the Power Switch to " " or " " (or "5S") while pressing down the Lock Button. Pull out the viewfinder fully or open the LCD monitor fully. •You can tilt the LCD monitor upward to 180 degrees so that it faces forward and view yourself while self-recording with the viewfinder pushed back. 2 ACCESS RECORDING MENU Press MENU/SET. The Recording Menu appears. 3 ACCESS MODE MENU Move the highlight bar to "TO MODE MENU" by rotating MENU/SET. Press it. The Mode Menu appears. 4 SET SELF-TIMER Move the highlight bar to "SELF-TIMER" by rotating MENU/SET. Press it and the parameter is highlighted. Rotate MENU/SET until "ON" appears. Press it twice to exit from the Recording Menu. 5 ENGAGE SELF-TIMER MODE Press START/STOP. After 15 seconds, the beep sounds and video recording starts. To stop Self-Timer recording, press START/STOP again. The camcorder re-enters Record-Standby mode. OR Press PHOTO (SNAPSHOT). After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder re-enters Record-Standby mode. 6 END SELF-TIMER RECORDING Set the Operation Switch to " " or set the Power Switch to "OFF". "SELF-TIMER" is automatically set back to "OFF". When START/STOP or PHOTO (SNAPSHOT) is pressed, the tally lamp changes as shown: ¥ Begins blinking Blinks quickly ¥ Stops blinking (Self-Timer starts) (Self-Timer shooting and stays on starts soon) (Self-Timer 4 shooting starts) After approx. 15 sec.