JVC GR-DVM70U Instruction Manual - Page 75

PCOFF CAMER PLAY A5SDSC DSC PLAY/ Power Switch Lock Button Open the connector cover. To DV IN/OUT DV cable (optional) To DV IN/OUT Video unit equipped with DV connector TW PLAY (4) STOP (5) RM-V713U (provided) EN75 Digital Dubbing Of Recorded Images/ Sounds Between Tapes It is also possible to copy recorded scenes from the camcorder onto other video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. 1 CONFIRM POWER-OFF STATUS Make sure the camcorder's power is off. 2 MAKE CONNECTIONS Connect the camcorder to your video unit equipped with a DV connector using the DV cable (optional) as shown in the illustration. 3 START PLAYBACK Press 4 to play back the source tape. 4 START RECORDING While watching the playback on the monitor, engage the DV connector-equipped video unit's record mode from the spot on the source tape you want to begin recording. NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 11). ● If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units. ● For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder. ● If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. ● Even though the DV cable is connected correctly, sometimes the image may not appear in step 3. If the above ● occurs, turn off power and make connections If "Playback Zoom" (੬ pg. 82), "Playback Sapgaeicni.a1l Effects" (੬ pg. 83), "Superimposing A Title/Frame" (੬ pg. 69) or "Snapshot" is attempted during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector. ● Be sure to use a DV cable with the core filter. To Use This Camcorder As A Recorder . . . 1. Turn the Power Switch to " " while pressing down the Lock Button. 2. Connect the DV cable as shown in the illustration and load a cassette to record on. 3. Press START/STOP to engage the Record-Pause mode. "DV IN" appears on the screen. 4. Press START/STOP to start recording. "DV IN" changes to " DV IN ". 5. Press START/STOP again to engage the Record-Pause mode. " DV IN " returns to "DV IN". NOTES: ● During Digital Dubbing, the image is dubbed using the recording mode selected in the Mode Menu (੬ pg. 15). ● Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current "SOUND MODE" setting (੬ pg. 39). ● During Digital Dubbing, no signal is output from the AV OUT connector.