JVC GR-DVM70U Instruction Manual - Page 99

INDEX Docking Station 456 1 2 3 7 8 9 0 ! EN99 1 JLIP (Joint Level Interface Protocol) Connector Connect to a JLIP-compatible camcorder or VCR to control it from the computer using the provided Software. NOTE: Make sure that the camcorder is turned on while connecting the camcorder to a PC using the Docking Station's JLIP connector. If the camcorder is turned off (because the Power Switch is set to "OFF" or due to Auto Shut Off* etc.) while the JLIP program software is used, it will be impossible to control the connected devices from the computer. In such a case, first try turning the camcorder on again, or unplug the JLIP connection cable from the Docking Station's JLIP connector. Then, initialize or run the software again. * Auto Shut Off: If 5 minutes elapse in the Record-Standby mode or in the Pause mode, the camcorder's power shuts off automatically to conserve energy. 2 PC Connector [DIGITAL STILL pg. 72 3 Edit Connector [EDIT pg. 85 Connect the editing cable when performing Random Assemble Editing (੬ pg. 84 - 89). 4 Stud pg. 70 5 Screw pg. 70 6 Multi Connector The Docking Station can be connected with this camcorder through this connector. Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure. 7 S-Video Output Connector [S OUT pg. 70, 85 8 Video Output Connector [VIDEO pg. 70, 85 9 Audio Output Connector [AUDIO L/R pg. 70, 85 0 External Stereo Microphone Input Connector [MIC pg. 90 ! Screw Knob pg. 70 To attach the camcorder, tighten this clockwise.