JVC GR-DVM70U Instruction Manual - Page 41
Fade/Wipe Effects
UPC - 046838157424
View all JVC GR-DVM70U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Operation Switch A M START/STOP Button Lock Button /PCOFF CAME Power lamp PLAY RA5S DSC DS C PLAY MENU/SET Dial Display FOCUS AUTO EXPOSURE AUTO W. BALANCE AUTO 4 FADER OFF / WIPE P. AE OFF / EFFECT FLASH ADJ. 0 TO MODE MENU END Power Switch Recording Menu FADER / WIPE P ?R SEL. 4 WH BK B W WIPE - SHUTTER RANDOM OFF FADER - WHITE FADER - BLACK FADER -MOSAIC FADER - B.W FADER/WIPE Menu MANUAL WH PAUSE [Ex.: FADER - WHITE] Fade-in Fade/Wipe Effects EN41 IMPORTANT: If certain modes of Program AE with special effects (੬ pg. 44) are activated, some Fade/Wipe Effects cannot be used. If you select a Fade/Wipe Effect that is unusable in the current situation, the indication blinks. These effects let you make pro-style scene transitions. Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to scene. This function is available only when the Power Switch is set to " ". EFFECT SELECTION 1 SELECT OPERATION MODE Set the Operation Switch to " ". Then set the Power Switch to " " while pressing down the Lock Button. Pull out the viewfinder fully or open the LCD monitor fully. 2 ACCESS RECORDING MENU Press MENU/SET. The Recording Menu appears. 3 ACCESS "FADER/WIPE" MENU Rotate MENU/SET to move the highlight bar to "FADER/WIPE", then press it. 4 SELECT EFFECT Rotate MENU/SET to move the highlight bar to the desired function, then press it. •The FADER/WIPE Menu disappears and the effect is reserved. The indicator representing the selected effect appears. FADE/WIPE SELECTION , and ) A scene gradually appears on a black, white, or black-andwhite screen (Fade-in or Wipe-in); or disappears, leaving a black, white, or black-and-white screen (Fade-out or Wipe-out). Fade or Wipe works when recording is started or when you stop recording. Before the following step, perform the above steps 1 through 4. 5 START OR END RECORDING Press START/STOP to activate Fade-in/out or Wipe-in/ out. NOTE: ੬ pg. 42. Fade-out