JVC GR-DVM70U Instruction Manual - Page 85

To EDIT Red to AUDIO R OUT Yellow to VIDEO OUT* To S-VIDEO OUT White to AUDIO L OUT White to AUDIO L IN Audio/ Video cable [RCA plug to RCA plug] (optional) S-Video cable (optional) Editing cable (provided) Red to AUDIO R IN Yellow to VIDEO IN* VCR To S-VIDEO IN To Remote PAUSE or R.A. EDIT To PAUSE IN TV TW DISPLAY FADE/WIPE PLAY R.A.EDIT ON/OFF RM-V713U (provided) * Connect when the S-Video cable is not used. MAKE CONNECTIONS Also refer to pg. 70 and 71. EN85 1 CONNECT TO . . . JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL Connect the editing cable to the Remote PAUSE terminal. JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR Connect the editing cable to the R.A.EDIT connector. VCR OTHER THAN TYPE OR Connect the editing cable to the RM-V713U's PAUSE IN connector. 2 PREPARE CAMCORDER Insert a recorded tape and set the Power Switch to " " while pressing down the Lock Button. 3 PREPARE VCR Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR's instructions). SELECT SCENES 4 START SOURCE PLAYBACK Press PLAY (4) and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder's remote sensor. •The Random Assemble Editing Menu appears. 5 EXECUTE FADE/WIPE IN (IF NECESSARY) Press FADE/WIPE on the remote control. •Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed. •You cannot use a Picture Wipe/Dissolve at the beginning of Program 1. NOTES: ● The S-Video cable and Audio/Video cable (RCA plug to RCA plug) are optional. Be sure to use the following: • S-Video cable: YTU94146A • Audio/Video cable (RCA plug to RCA plug): YTU94147A Consult the JVC Service Center described on the sheet included in the package for details on their availability. ● You can use the AV OUT connector on the camcorder for connection. ● Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the remote control. Select "DISPLAY" and "TIME CODE" from the Playback Menu (੬ pg. 54) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, set "INDICATION" to "OFF" in the Playback Menu (੬ pg. 54) and press DISPLAY on the remote control. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape. CONTINUED ON NEXT PAGE