JVC GR-DVM70U Instruction Manual - Page 55

EN55 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to "SOUND 1" and 48 kHz is preset to "FULL SOUND".) Recording sound 32 kHz 48 kHz Display FULL SOUND SOUND 1 SOUND 2 FULL SOUND SOUND 1 SOUND 2 Output sound Stereo sound Stereo sound "L" sound is output on both channels "R" sound is output on both channels When watching a tape recorded at 32 kHz, if you want to change the output sound, access the Playback Menu and, in step 3 on page 54, select "32 kHz MODE" and set it for "FULL SOUND", "SOUND 1" or "SOUND 2". When playing back a tape recorded at 48 kHz, set in the same manner. NOTES: ● You can also use the provided RM-V713U remote control's AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder's remote sensor. ● During playback, the camcorder detects the sound mode in which the recording was made. This detection cannot be made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner. Display TC 12 : 34 : 24 DEC 25 ' 98 PM 5 : 30 Frames* Seconds Minutes *30 frames = 1 second TIME CODE (Displaying The Time Code During Playback) You can display the Time Code on screen during playback. This is especially useful for editing. This function is preset to "OFF". To turn it on, select "TIME CODE" at the Playback Menu and change the setting (੬ pg. 54). ON- The Time Code is displayed on the playback screen. OFF- The Time Code does not appear. DISPLAY (Displaying the Date During Playback) If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. This function is preset to "ON". To turn it off, select "DISPLAY" at the Playback Menu and change the setting (੬ pg. 54). ON- The date is displayed on the playback screen. OFF- The date is not displayed. TC 12 : 34 : 24 DEC 25 ' 99 PM 5 : 30 32kHz/SOUND1 TC 12 : 34 : 24 DEC 25 ' 99 PM 5 : 30 INDICATION You can make the Playback Sound, Time Code and Date indications disappear. This function overrides the "TIME CODE" and "DISPLAY" settings in the Playback Menu. The factory-preset is "ON". To turn it off, select "INDICATION" in the Playback Menu and change the setting (੬ pg. 54). OFF- The Playback Sound, Time Code and Date indications do not appear on the Playback Screen. ON- The Playback Sound, Time Code and Date indications are displayed according to how "TIME CODE" and "DISPLAY" are set in the Playback Menu. NOTE: If "INDICATION" is set in the Mode Menu, "INDICATION" in the Playback Menu will also be set to the same setting (੬ pg. 36 - 39).