JVC GR-DVM70U Instruction Manual - Page 32

32 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Snapshot (For Video Recording) Use your camcorder like a regular camera and take a snapshot, or several of them in succession. This feature lets you record still images that look like photographs onto a tape. PLAY Lock Button PHOTO (SNAPSHOT) Button A M /PCOFF CAME Power lamp SNAPSHOT MODE SELECTION 1 SELECT OPERATION MODE Set the Operation Switch to " " or " ". Then, set the Power Switch to " " while pressing down the Lock Button. Pull out the viewfinder fully or open the LCD monitor fully. 2 SELECT SNAPSHOT MODE Choose the appropriate mode from among the 5 Snapshot modes (੬ pg. 33) by pressing SNAPSHOT MODE. Press SNAPSHOT MODE as many times as necessary until the desired snapshot mode indicator is displayed. RA5S DSC DS C PLAY Operation Switch Power Switch SNAPSHOT MODE Button Display FULL Snapshot mode SNAPSHOT RECORDING 1 TAKE SNAPSHOT Press PHOTO (SNAPSHOT). If you press during Record-Standby PHOTO" appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording PHOTO" appears and a still image will be recorded for approx. 5 seconds, then the normal recording resumes. •When the " " flash ready indicator is displayed, the flash fires. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (The interval between the still images: approx. 1 second.) However, when "REC SELECT" is set to "TAPE & CARD" in the System Menu (੬ pg. 39), the Motor Drive Mode does not take place. To Remove The Shutter Sound. . . .... when you don't want to hear the shutter sound, set BEEP/TALLY to "OFF" in the System Menu (੬ pg. 36 - 39). Though the sound is not heard from the speaker, it is recorded on the tape. PHOTO During snapshot