JVC GR-DVM70U Instruction Manual - Page 44

44 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Operation Switch Program AE With Special Effects A M Lock Button /PCOFF CAME Power lamp PLAY RA5S DSC DS C PLAY MENU/SET Dial Display 4 P. AE OFF / EFFECT FLASH ADJ 0 TO MODE MENU END Power Switch Recording Menu P. AE / EFFECT TWILIGHT SEPIA B/W MONOTONE SEL. 4 CLASSIC FILM STROBE 1 SLOW 4X 2 SLOW 10X P.AE/EFFECT Menu IMPORTANT: If certain Fades or Wipes (੬ pg. 43) are activated, some modes of Program AE with special effects cannot be used. If you select a mode that is unusable in the current situation, the mode's symbol blinks. You can choose any one of the effects from the P.AE/ EFFECT Menu. 1 SELECT OPERATION MODE Set the Operation Switch to " ". Then set the Power Switch to " " or " " while pressing down the Lock Button. Pull out the viewfinder fully or open the LCD monitor fully. 2 ACCESS RECORDING MENU Press MENU/SET. The Recording Menu appears. 3 ACCESS "P.AE/EFFECT" SELECT MENU Rotate MENU/SET to move the highlight bar to "P.AE/ EFFECT", then press it. 4 SELECT MODE Move the highlight bar to the desired mode by rotating MENU/SET, then press it. •The P.AE/EFFECT Menu disappears and the selected mode is activated. The symbol of the selected mode appears. 5 DISABLE MODE To turn off the selected mode, re-access the P.AE/ EFFECT Menu and move the highlight bar to "OFF" by rotating MENU/SET. Then press it. NOTES: ● Program AE with special effects can be changed during recording or during Record-Standby. ● The following modes are available only when the Power Switch is set to " ": "CLASSIC FILM", "STROBE" and "VIDEO ECHO". PAUSE The indicator for the selected mode appears, and the selected mode is engaged.