JVC GR-DVM70U Instruction Manual - Page 94
The Black & White Fader - troubleshooting
UPC - 046838157424
View all JVC GR-DVM70U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
94 EN TROUBLESHOOTING (cont.) SYMPTOM 17. Program AE with special effects and Fade/Wipe Effects do not work. POSSIBLE CAUSES 17. • The Operation Switch is set to " " and/or the Power Switch is set to "5S". 18. The Black & White Fader does not work. 19. The Dissolve function does not work. 18. • The Sepia or Monotone mode is activated. 19. • The Sepia, Monotone or Slow Shutter mode of Program AE with special effects is activated. • The Squeeze mode is selected. • The previously selected mode of Program AE with special effects was changed after the last selected scene for editing was registered. 20. The Picture Wipe and Dissolve functions do not work. 20. • The last selected editing scene is ending. • At the end of the last selected scene for editing, the Power Switch was set to "OFF". • The power is off. 21. The picture wipe function doesn't work. 21. • The Slow Shutter mode is activated. • The Squeeze or Cinema mode is selected in the Mode Menu. 22. Scene transition does not go as expected. 22. • When using "Picture Wipe/ Dissolve" (੬ pg. 42) or "Dissolves during 5 second recording mode" (੬ pg. 30), there is a delay of a fraction of a second between the previous record stop-point and the Dissolve start-point. This is normal, but this slight delay becomes especially noticeable when shooting fast-moving subject or during rapid panning. CORRECTIVE ACTION 17. • Set the Operation Switch to " " and/or set the Power Switch to " " or " ". 18. • Turn off Sepia and Monotone (੬ pg. 44). 19. • Turn off Sepia, Monotone or Slow Shutter before adding Dissolve to a scene transition (੬ pg. 44). • Make sure that the Squeeze mode in the Mode Menu is set to "OFF" (੬ pg. 38). • Make sure you have selected the mode of Program AE with special effects you want before starting editing (੬ pg. 44). 20. • Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically activated (੬ pg. 42). • Do not turn off the camcorder's power after setting Edit-In and Edit-Out points, as they will all be erased (੬ pg. 42). • The camcorder automatically shuts off after 5 minutes have elapsed in the RecordStandby mode. Make sure you continue operations within 5 minutes after engaging Record-Standby mode (੬ pg. 42). 21. • Make sure the Squeeze mode, Cinema mode, or Slow Shutter mode is not activated when preparing to use the Picture Wipe function (੬ pg. 38, 45). 22. ----