JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 20
Initial Settings Cont.
![]() |
View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 EN VCR TV CABLE/DBS 1 2 3 4 5 6 7 8 9 0 7 @ # 6 7 OK NOTES: ● The Controller may not work with all types of DBS receiver. ● If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. In addition, if your DBS receiver is equipped with a timer, you can also use "Satellite Auto Recording" (੬ pg. 60). ● The VCR can only change the satellite channel through the Controller during timer recording. ● If your DBS receiver cannot be operated with a remote control (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. ● For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722. INITIAL SETTINGS (cont.) 6 Access DBS Receiver Brand Set screen Press OK. 7 Enter DBS Receiver's brand Press the appropriate DBS RECEIVER BRAND SET Number keys to enter the brand code from the 4 0 following list, then press OK. The program currently received through the PRESS NUMBER KEY (0-9) THEN (OK) TO TEST PRESS (MENU) TO END DBS receiver appears for about 10 seconds. BRAND JVC (DISH Network) ECHOSTAR (DISH Network) PRIMESTAR SONY (DSS) RCA (DSS) CODE 51 51 50 41 40 ● If the DBS receiver's channel changes to the channel listed below for your brand, setting is complete JVC = 100 ECHOSTAR = 100 PRIMESTAR = 55 SONY = 205 RCA = 205 Press OK and "DBS RECEIVER CONTROL IS ON" appears on the screen for about 5 seconds, then it DBS RECEIVER BRAND SET 51 DID YOUR DBS RECEIVER CHANGE TO CHANNEL 205? 2 YES 3 NO returns to the normal screen. PRESS (2 3), THEN (OK) PRESS (MENU) TO END ● If the DBS receiver's channel does not change as shown above 1 Press @ # to move the highlight bar to "NO". 2 Press OK. 3 Re-enter the correct code.
![](/manual_guide/products/jvc-hmdh30000up-84-pg-instruction-manual-hmdh30000u-dvhs-recorderplayer-pdf-17mb-3a148f6/20.png)