JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 29

C Watching one program while recording another 1 Engage TV mode During recording... ● Change the TV's input mode from AV to TV. 2 Select channel for viewing Select the channel you want to watch, on the TV. D Showing on-screen display When "SUPERIMPOSE" is set to "ON" (੬ pg. 56), you can see the current VCR status on the TV screen. ● For more detailed information about the on-screen display, see page 79. 1 Display VCR status on TV screen During recording or recording pause, press OSD on the Remote. All indications corresponding to the current VCR status are SAP STEREO REC PAUSE HI-FI THU 12:00 AM ] STD - 1:23:45 B 33 INDEX-9 E displayed for 5 seconds. The time counter remains on the screen indicating the elapsed time. ● The indications are not recorded. 2 Exit on-screen display Press OSD again. NOTES: ● If the VCR is in recording pause mode, "REC PAUSE" is always displayed. ● The VCR status can be also displayed during playback. EN 29 E Recording on VHS tapes with S-VHS quality - Super VHS ET This function allows you to record on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back only on a VCR equipped with the S-VHS ET function. ● You can activate this function only before you start recording on a VHS tape. ● Before recording, make sure "V, CALIBRATION" is set to "ON" (੬ pg. 53). 1 Select S-VHS ET mode Press S-VHS ET on the front panel. The S-VHS ET lamp lights up. ● To disengage the S-VHS ET mode, press S-VHS ET again. The lamp goes off. 2 Start recording On the front panel: Press REC ( ¶ ). On the Remote: While holding REC ( ¶ ), press PLAY ( 3 ). NOTES: ● You cannot activate the S-VHS ET function... - while recording is in progress. - while timer-recording or Instant Timer Recording (੬ pg. 28) is in progress. - while Video Calibration (੬ pg. 53) is in progress. ● S-VHS ET does not work with S-VHS tapes. ● To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording on S-VHS tapes is recommended. ● . Use of high recordings. grade tapes are recommended for S-VHS ET On some tapes, picture quality will not improve even if the S- VHS ET function is used. Check the recording quality before you start important recordings. ● You can play back S-VHS ET recordings on most of S-VHS VCRs and of VHS VCRs equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some VCRs are not compatible with this function.) ● While playing back a tape recorded with this function, noise may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.) ● During special effect playback (੬ pg. 31), noise may appear. If special effect playback is performed frequently on a tape recorded with this function, the tape may be damaged and picture may be deteriorated