JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 34
VCR Plus, Timer, Programing
View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 EN VCR Plus+® Timer Programing Turn on the VCR and the TV, and select the AV mode on the TV. 1 VCR TV CABLE/DBS DAILY (M-F) CANCEL STOP +/- 2 7 1 2 3 4 5 6 7 8 9 0 POWER 3 4 WEEKLY 8 6 4 3 4 7 TIMER RECORDING Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method (੬ pg. 38) as far as a year in advance. The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR's timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.) 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● The VCR turns on, and the counter is reset, automatically. 2 Access VCR Plus+ screen Press PROG. on the PLUSCODE NUMBER Remote. ● The clock must be set to access the VCR Plus+ screen. If you have not set the clock, the Main Menu PRESS NUMBER KEYS (0-9) PRESS (+/-) TO SET EXPRESS PROGRAMMING PRESS (PROG.) TO END screen appears after an error message is displayed. Refer to page 9 for the Plug & Play setting or page 10 for the clock setting procedure. 3 Enter PlusCode number Press the appropriate Number keys to input PLUSCODE NUMBER the PlusCode number printed in the TV 123 listings for the TV broadcast you wish to record, then press OK. PRESS NUMBER KEYS (0-9) THEN (OK) PRESS (PROG.) TO END Then; If the Guide Channel Set screen appears - go to step 4. If the VCR Plus+ Program screen appears - go to step 5. ● To make corrections, press CANCEL and input the correct PlusCode number.