JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 21

Basic, Playback

Get JVC HM-DH30000UP - D-vhs Recorder/player PDF manuals and user guides View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

BASIC PLAYBACK AND RECORDING Basic Playback Turn on the VCR and the TV, and select the AV mode on the TV. POWER 2 1 STOP/EJECT ( 7/0 ) VCR TV CABLE/DBS 2 REW ( 1 ) 1 2 3 4 5 6 7 8 9 0 POWER FF ( ¡ ) STOP ( 7 ) SHUTTLE ring EN 21 This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures. ● This recorder can play back tapes that have been recorded in D-VHS (MTP), S-VHS and VHS formats. ● When playing back a tape, this recorder automatically identifies the recording format (D-VHS, S-VHS, or VHS). ● When you play back a tape recorded on this VCR, you can use the Video Navigation function (੬ pg. 42). 1 Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Do not apply too much pressure when inserting. ● The VCR turns on automatically. ● The counter is automatically reset to "0:00:00". ● The tape will run for a few seconds while the VCR searches for the tape number. If the tape number is found, it will be shown on the TV screen if "SUPERIMPOSE" is set to "ON." (੬ pg. 56) ● If the cassette's record safety tab has been removed, playback begins automatically. 2 Start playback Press PLAY ( 3 ). ● Tape speed is automatically detected. ● If "V, CALIBRATION" is set to "ON" (default setting: ੬ pg. 53), "V, CALIBRATION" appears on the screen, and this VCR checks the tape condition during automatic tracking (only cassettes recorded in the S-VHS or VHS mode). To stop playback Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 ) on the front panel. To rewind the tape (when it is not running) Press REW ( 1 ). To fast-forward (when it is not running) Press FF ( ¡ ). To eject the tape Press STOP/EJECT ( 7/0 ) on the front panel when the tape is not running. ● You can also eject the cassette when the VCR is turned off. To turn off the VCR Press POWER. NOTES: ● When you use the Video Navigation function, operate the VCR only after the tape number is detected; otherwise, you cannot use the Video Navigation function. ● When playing back a tape recorded in D-VHS format, the JOG dial and SHUTTLE ring do not work.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
EN
21
1
BASIC PLAYBACK AND RECORDING
Basic
Playback
This VCR can check the tape condition during playback
(and recording), and realizes the best possible pictures.
●
This recorder can play back tapes that have been
recorded in D-VHS (MTP), S-VHS and VHS formats.
●
When playing back a tape, this recorder automatically
identifies the recording format (D-VHS, S-VHS, or
VHS).
●
When you play back a tape recorded on this VCR, you
can use the Video Navigation function (
Z
pg. 42).
1
Load a cassette
Make sure the window side is up, the rear label
side is facing you and the arrow on the front of
the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
●
The VCR turns on automatically.
●
The counter is automatically reset to “0:00:00”.
●
The tape will run for a few seconds while the
VCR searches for the tape number. If the tape
number is found, it will be shown on the TV
screen if “SUPERIMPOSE” is set to “ON.”
(
Z
pg. 56)
●
If the cassette’s record safety tab has been
removed, playback begins automatically.
2
Start playback
Press
PLAY (
3
)
.
●
Tape speed is automatically detected.
●
If “V, CALIBRATION” is set to “ON” (default
setting:
Z
pg. 53), “V, CALIBRATION” appears
on the screen, and this VCR checks the tape
condition during automatic tracking (only
cassettes recorded in the S-VHS or VHS mode).
To stop playback
Press
STOP (
7
)
on the Remote or
STOP/EJECT
(
7
/
0
)
on the front panel.
To rewind the tape (when it is not running)
Press
REW (
1
)
.
To fast-forward (when it is not running)
Press
FF (
¡
)
.
To eject the tape
Press
STOP/EJECT (
7
/
0
)
on the front panel when the
tape is not running.
●
You can also eject the cassette when the VCR is turned
off.
To turn off the VCR
Press
POWER
.
NOTES:
●
When you use the Video Navigation function, operate the
VCR only after the tape number is detected; otherwise, you
cannot use the Video Navigation function.
●
When playing back a tape recorded in D-VHS format, the
JOG
dial and
SHUTTLE
ring do not work.
Turn on the VCR and the TV, and select the AV
mode on the TV.
1
2
3
4
5
6
7
8
9
0
VCR
TV CABLE/DBS
2
STOP (
7
)
FF (
¡
)
REW (
1
)
POWER
2
STOP/EJECT (
7
/
0
)
POWER
SHUTTLE
ring