JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 25
Adjusting picture condition, Locating beginning of timer, recordings, Skipping unwanted portions
View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
H Locating beginning of timer recordings - Instant Review At the press of a button, you can turn on the VCR, rewind the tape and begin to view the most recent timerrecorded program. Press REVIEW on the Remote after ensuring that the VCR is in the timer recording standby mode. ● The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically. ● You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times. ● If you want to find the very beginning of the desired program, press REW ( ) or FF ( ) or turn the SHUTTLE ring after playback starts. ● If the tape is already rewound when REVIEW is pressed, it will play the tape from the beginning. It will not fast-forward to an index code. ● The Instant Review function will also operate if the VCR is turned on. I Skipping unwanted portions - Skip Search You can skip over (view at high speed) unwanted portions of the tape. Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a 30-second period of high speed playback (up to 2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press PLAY ( 3 ). EN 25 J Adjusting picture condition - Digital 3-DNR (S-VHS/VHS only) The Digital 3-DNR (3-Dimension Noise Reduction) cuts noise and reproduces clear pictures. Normally turn on Digital 3-DNR. The playback picture may be distorted depending on the tape. In this case, turn off Digital 3-DNR. Press DIGITAL 3-DNR on the front panel so that the DIGITAL 3-DNR lamp lights up. Each time you press the button, this function turns on and off. Other Useful functions for playback (S-VHS/VHS only) You can also use the following functions for playback. ● Video Calibration (S-VHS/VHS only) (੬ pg. 53) When this function is set to "ON", this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highestpossible pictures. ● Picture Control (੬ pg. 53) This function helps you to adjust the playback picture quality according to your preference. ● Digital R3 (੬ pg. 53) This function applies edge correction to the luminance signal to enhance details and provides clear pictures. ● Video Stabilizer (੬ pg. 53) You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR.