JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 24

24 EN J VCR TV CABLE/DBS F -a F -a, b, c REW ( ) 1 2 3 4 5 6 7 8 9 0 BASIC PLAYBACK AND RECORDING (cont.) F -b F Automatic operations after rewinding - Next Function Memory The Next Function Memory "tells" the VCR what to do after rewinding is complete. ● Ensure that the VCR is in stop mode. a- For Automatic Playback Start Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds. b- For Automatic Power Off Press REW ( 1 ), then press POWER within 2 seconds. c- For Automatic Timer Standby Press REW ( 1 ), then press TIMER within 2 seconds. NOTE: It is not possible to select the Automatic Timer Standby function if the cassette's record safety tab is removed. F -C I FF ( ) G H SHUTTLE ring G Locating beginning of recordings - Index Search Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function. 1 Start search While the tape is not running, press 4 or ¢ on the Remote. 2 Access distant code To access a recording of 2 to 9 index codes away, press 4 or ¢ repeatedly until the correct number is displayed on the screen (only if "SUPERIMPOSE" is set to "ON" ; ੬ pg. 56). Playback begins automatically when the desired recording is located. Beginning of the current program recorded Previous program recorded -2 -1 4 Current position Beginning of the 2nd next on the tape program recorded Next program recorded 2nd next 1 2 3 ¢ ● If you want to find the very beginning of the desired program, press REW ( ) or FF ( ) or turn the SHUTTLE ring after playback starts. NOTE: An index code is not placed on the tape when recording is resumed from recording pause.