JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 38
Express Timer, Programing
![]() |
View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 EN Express Timer Programing Turn on the VCR and the TV, and select the AV mode on the TV. 1 VCR TV CABLE/DBS DAILY (M-F) DBS 3 - 7 1 2 3 4 5 6 7 8 9 0 2 9 POWER WEEKLY 0 8 9 TIMER RECORDING (cont.) You can directly program the VCR's timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (੬␣ pg. 10). 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● The VCR turns on, and the counter is reset, automatically. 2 Access VCR PLUS+ screen Press PROG.. 3 Access Program screen Press START +/- once. PROGRAM START STOP DATE - -:- -AM - -:- -AM - -/- -/- - CH SUN - - - STD (SP) PRESS (+/-, SP/EP, 8=DAILY 9=WEEKLY) THEN (OK) PRESS (PROG.) TO END 4 Set program start time Press START +/- repeatedly to enter the time you want recording to start. ● Press and hold START +/- to increase the time in 30-minute intervals. PROGRAM START STOP DATE 8:00AM - -:- -AM - -/- -/- - CH SUN - - - STD (SP) PRESS (+/-, SP/EP, 8=DAILY 9=WEEKLY) THEN (OK) PRESS (PROG.) TO END 5 Set program stop time Press STOP +/- repeatedly to enter the time you want recording to stop. ● Press and hold STOP +/- to increase the time in 30-minute intervals. 6 Set program date Press DATE +/-. (The current date is displayed on the screen. The date you enter appears in its place.) 7 Set channel number Press CH +/-. ● If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page. ● Holding down CH +/- rapidly changes the channel numbers.
![](/manual_guide/products/jvc-hmdh30000up-84-pg-instruction-manual-hmdh30000u-dvhs-recorderplayer-pdf-17mb-3a148f6/38.png)