JVC HM-DH30000UP 84 pg. instruction manual on the HM-DH30000U D-VHS recorder/p - Page 54
Audio settings [AUDIO]
View all JVC HM-DH30000UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 EN Audio settings [AUDIO] Ⅵ DV AUDIO REC AUDIO1 AUDIO2 1+2MIX Ⅵ OPTICAL OUT Dolby D 2CH-PCM OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. Up to four audio signal channels can be input from a DV camcorder through the DV IN connector (i.LINK). This recorder allows you to select and record two of these channels. This setting is used to specify which two channels to record. When there are four DV audio channels (32kHz): AUDIO1: Records the two channels (L/R) of DV AUDIO 1. AUDIO2: Records the two channels (L/R) of DV AUDIO 2. 1+2MIX: Mixes and records both DV AUDIO 1 and 2. When there are two DV audio channels (48kHz): Because there are only two channels, those two channels are recorded regardless of the DV sound setting. This VCR can send the Dolby Digital bitstream or PCM Audio to external devices. When you play back a tape including the Dolby Digital bitstream, and if you have a device equipped with Dolby Digital decoder, set this function to "Dolby D". If not, set this function to "2CH-PCM". The digital audio is output only when you play back a tape recorded in D-VHS format. The digital audio is not output when you play back a tape recorded in S-VHS/VHS format. This VCR Y PB/CB PR/CR R AUDIO L VIDEO OUT IN(L-1) R AUDIO L(MONO) VIDEO S VIDEO OUT IN(L-2) IN S VIDEO CABLE BOX VHF/UHF ANTENNA IN REMOTE PAUSE/ AV COMPU LINK TV OUT i.LINK IN/OUT DV IN S200 DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL Ⅵ 2ND AUDIO REC ON OFF Amplifier equipped with Dolby Digital decoder Note for connection: Remove the connector cover from the VCR and the protection cap from the cable. When this function is set to "ON"; ● If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded. ● If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal tracks. When this function is set to "OFF", the SAP audio cannot be recorded.