Konica Minolta C83hc High Chroma Plockmatic SD-350/SD-500 System Operator Manu - Page 11
What You Can Do With This Machine, Rotate Crease Trim Module, SD-BM500 or SD-BM350 Booklet Maker
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
What You Can Do With This Machine BookFold Module (option) Belt Stacker SD-BM500 upgrade kit (option) incl. alive logo Cover Feeder Module (option) Trimmer Module (option) Rotate Crease Trim Module (option) SD-BM500 Production Booklet Maker Interface Module (comes with the RCT) The Plockmatic SD-500 or the Plockmatic SD-350 Production Booklet Maker System consists of: Rotate Crease Trim Module (optional), also referred to as the RCT Module or the RCT SD-BM500 or SD-BM350 Booklet Maker, also referred to as the SD-BM350/500 or the Booklet Maker Cover Feeder Module (optional), also referred to as the Cover Feeder or the CF BookFold Module (optional), also referred to as the BookFold or the BF Trimmer Module (optional), also referred to as the Trimmer or the TR BST4000-1 Belt Stacker Module (optional), also referred to as the BST Module or the BST Together they form a system that allows full bleed booklet making online with the Printer. A productivity enhancement is the SD-BM500 upgrade kit. This kit increases the capacity of the SD-BM350 Booklet maker from 35 sheets to 50 sheets. This means that instead of 140 page booklets, 200 page booklets are now possible. The SD-BM500 upgrade kit also includes the Live logo feature. The logo below the user interface will be illuminated, allowing the user to monitor the system status from a distance. The print-outs first enter the Rotate Crease Trim Module. The RCT Module is able to rotate (rotator is optional) small(er) sheets from long edge feed to short edge feed to maintain high printer productivity. In order to avoid toner cracking at the spine when folded, the RCT can be programmed to crease the cover sheet. The RCT can also trim the long sides of the booklet sheets to deliver booklets in the desired size. To enable full bleed booklets, a Trimmer Module must be installed after the Booklet Maker, see below. From the RCT, the printed sheets are transported into the SD-BM500 or SD-BM350 Production Booklet Maker where they are compiled in the stapler area. continued on next page 11