Konica Minolta C83hc High Chroma Plockmatic SD-350/SD-500 System Operator Manu - Page 92
Adjustment of Creaser registration angle, Loosen the star shaped knob [A].
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Adjustment of Creaser registration angle Adjustment of Creaser registration angle 1 Loosen the star shaped knob [A]. 2 Turn the knurled eccentric adjuster [B] to move reference mark in the desired direction. 3 Tighten the star shaped knob [A] again. Process direction Lower the operator side side of the creaser to remedy this misalignment 7 Reference marks [A] [B] 92
92
7
[A]
[B]
Adjustment of Creaser registration angle
Adjustment of Creaser registration angle
1
Loosen the star shaped knob [A].
2
Turn the knurled eccentric adjuster [B] to move reference mark in the desired direction.
3
Tighten the star shaped knob [A] again.
Reference marks
Lower the opera-
tor side side of the
creaser to remedy
this misalignment
Process direction