Konica Minolta C83hc High Chroma Plockmatic SD-350/SD-500 System Operator Manu - Page 45
Customizing settings, Staple, Selecting stapling On or Off, Adjusting staple position
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Customizing settings Staple Selecting stapling On or Off From the Settings for Booklet Production screen, press the [Staple] button. 2 Select On or Off by pressing the corresponding button and save setting by pressing the green [check] button. Adjusting staple position From the Settings for Booklet Production screen, press the [Staple] button. Set to Manual, the staple position can be altered up to 3 mm (0.12") on either side of the fold. Press the [+] button move position closer to the lead edge and press the [-] button move position closer to the trail edge. Save setting by pressing the green [check] button. NOTE: This change can be performed during run. Set to Auto, the Booklet Maker uses the set thickness sensor to adjust the staple position. Press the [Auto] button and save setting by pressing the green [check] button. 45