Konica Minolta C83hc High Chroma Plockmatic SD-350/SD-500 System Operator Manu - Page 5
CAUTION, General safety, continued
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
General safety, continued CAUTION • The machine and its peripherals must be installed and maintained by a customer service representative who has completed the training course on those models. • Always follow all warnings marked on, or supplied with, the equipment. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • Disconnect the power cord before you move the machine. While moving the machine, always exercise care and make sure that the power cord will not be damaged under the machine. • Always contact service if relocating the equipment. • Do not move the machine while the machine is running. • Do not open covers while the machine is running. • Do not switch off the power while the machine is running. Make sure the machine cycle has ended. • Lay the power cord in a way that nobody will stumble over it. Do not place things on the cord. • Never attempt any maintenance function that is not specifically described in this documentation. • Always keep magnets and all devices with strong magnetic fields away from the machine. • If the place of installation is air-conditioned or heated, do not place the machine where it will be: • Subject to sudden temperature changes. • Directly exposed to cool air from an air-conditioner. • Directly exposed to heat from a heater. • If the machine is not used over an extended period of time it should be unplugged to prevent damage in the case of overload. NOTE: • The indications like front and rear, left and right refer to the paper transport direction. • The operator manual always has to be available at the place of use of the machine. • In the interest of technical development the company reserves the right to make alterations to specifications without prior notice!