Konica Minolta C83hc High Chroma Plockmatic SD-350/SD-500 System Operator Manu - Page 34
Change staple cartridges and Check stapler, Change left/right staple cartridge(s)
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Change staple cartridges and Check stapler The staple cartridges contains approximately 5000 staples each. Each cartridge includes all wearable parts. The cartridges may need to be removed either for replacement or for 1 jam clearance. Change left/right staple cartridge(s) The Booklet Maker will indicate "Change left/ right/left and right staple cartridges" when there are approximately 20 staples left in the stapler cartridge. Replace the indicated staple cartridge by doing the following: 1 Open the Booklet Maker top cover. 2 Remove either or both staple cartridges by lifting the lever [A], pressing either or both levers [B] and pulling either or both staple [B] cartridges [C] out using the grip [E] at both sides of the staple cartridge. NOTE: Lever [A] controls the stapler guides [D]. It is kept in place by a magnet and can be hard to release. Pressing either lever [B] makes it a bit easier to overcome the force of the magnet. 3 Replace by pushing a new staple cartridge [D] into stapler until it snaps into position. 4 Put the stapler guides [D] back in position so that lever is locked by the magnet. 5 Close booklet maker top cover and restart the job. [E] [A] [C] 34