Konica Minolta Kodak Scan Station 710 Operation Guide - Page 113
Scan Station details, Updating the Time/Date remotely, Scanner>Device>Details
View all Konica Minolta Kodak Scan Station 710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Scan Station details Updating the Time/Date remotely To view the details of a selected Scan Station: • Select Scanner>Device>Details. The Details dialog box will be displayed with detailed information about the selected Scan Station (e.g., software version, IP address, etc.). If your network has access to an NTP server, you can configure all of your Scan Stations to synch their internal clock with the NTP server by using the Update Time/Date option. 1. Select Scanner>Device>Update Time/Date. The following dialog box will be displayed. 2. Enter the Server Name or IP Address of the NTP server from which you want to synchronize the Scan Station's clock. 3. Select the port of the NTP server. The default is 123. 4. Enter the amount of time (in milliseconds) after which the Scan Station will stop attempting to synchronize its internal clock (500 milliseconds = 1/2 second). Do not change the default, unless you experience problems. 5. Select Version 3 or 4 of the NTP server. 6. Click Update. A-61796 September 2014 9-25