Konica Minolta Kodak Scan Station 710 Operation Guide - Page 93
Network configuration options, Adding a Scan Station
View all Konica Minolta Kodak Scan Station 710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Network configuration options Before you can start adding or discovering Scan Stations you must know the IP address or the device name; preferably both. To get the name of your Scan Station: 1. Be sure the Scan Station is on and operational. 2. Click on the Information icon on the Scan Station to display the name and IP address if the Scan Station is connected to a network. Adding a Scan Station Before adding a Scan Station to manage remotely, it is suggested that you obtain the Scan Station name(s) and/or IP addresses and remote access password(s) of the Scan Stations you want to add. NOTE: The Scan Station will only have an IP address if the Scan Station is connected to a network and has been configured. As Scan Stations are added, the main screen will be updated. 1. Select Scanner>Add Scanner. The Add Scanner dialog box will be displayed. 2. Enter the name of the Scan Station in the Scanner Name field. NOTE: Acceptable values in this field are: alphanumeric characters and a dash. No spaces or other symbols are allowed. 3. Enter the IP address. The IP address must be in IPv4 format xxx.xxx.xxx.xxx. A-61796 September 2014 9-5