Konica Minolta Kodak Scan Station 710 Operation Guide - Page 92
Grid view
View all Konica Minolta Kodak Scan Station 710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Grid view Following is a description of the grid view columns Scanner Name - displays the name assigned to the Scan Station. IP Address - displays the IP address that is associated with the Scan Station. DHCP - if the Scan Station is configured to retrieve the IP address using DHCP, this field will be checked. If the Scan Station is configured to use a statically defined IP address, this field will be blank. HTTPS - if the Scan Station is configured to communicate using HTTPS, this field will be checked. Scanner Group - Scan Stations can be associated with a group name. This column displays the group that the Scan Station is part of. This is set when adding a Scan Station. NOTE: This is not the same as the group of users defined when creating and modifying configurations. Model - displays the model number of the Scan Station (i.e., 730EX, 710, 5XX, etc.). Status - displays the current status of the Scan Station (e.g., idle, scanning, updating, rebooting, etc.). NOTE: When you press F5, the status of the discovered Scan Stations will be refreshed immediately. Last Command - displays the last command that was issued by the administrator including the date, time and the success or failure of the action performed. Comment - any comments added by the administrator when a Scan Station is added will be displayed in this column. Mac Address - displays the unique identifier of the network adapter. 9-4 A-61796 September 2014