Kyocera C8100DN Command Center Guide - Page 12
Basic > Defaults > Time, Summer Time
View all Kyocera C8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
COMMAND CENTER Pages Item Description Prefix Length Specifies the IPv6 prefix length of the hosts or network with which the print system is connecting. RA Select On to use RA to configure IPv6 addresses. (Stateless) Default Gateway Specifies the IPv6 address of the default gateway. DHCPv6 Specifies whether or not to obtain IPv6 IP addresses by automatic configuration. When RA is turned On, the IP addresses and server information are obtained via DHCPv6 based on the settings of the automatic configuration made under RA (router setting). Basic > Defaults > Time If a time server is used to synchronize the time as well, the current time can be adjusted regularly and easily. Enter the IP address of the time server and click the Synchronize button. Time information is required when you receive reports from this machine via E-mail. It is recommended that you set the time when the report mail function is enabled. Item Description Current Local Time Displays the time that is currently set in the machine. Current Universal Time (UTC/GMT) Displays the Greenwich Mean Time that is currently set in the machine. Time Zone Summer Time Time Server Synchronize with Time Server now Sets a time difference. Click the drop down list and select your region. Switches the Summer Time setting On and Off. Select On in order to have the Summer Time function applied when the time is synchronized with a time server. Enter the host name or IP address of the time server from which you want to acquire the time. Click the Synchronize button to synchronize the registered time with the designated timer server. Synchronization Displays the results of the synchronization operation with the Status time server. 8 KYOCERA COMMAND CENTER