Kyocera C8100DN Command Center Guide - Page 52

COMMAND CENTER Pages Item Auto Sending Max Job Log Run once now Description Determines whether the job log report is sent or not. Set this to On to send the report. Set the number of job logs for sending, from 1 to 1500. You can test this by clicking the Send button to immediately send a report. Advanced > Security > Secure Protocols You can encrypt communication between a PC and this machine using SSL encryption. After you have changed this setting, you must restart this machine. For the restarting procedure, refer to Basic > Defaults > Reset on page 9. Item SSL Description Specifies whether or not to use the SSL protocol. Serverside Settings Effective Encryption HTTP Security Secure Only (HTTPS) Not Secure (HTTPS & HTTP) Selects the encryption algorithm(s) to be used. Specifies the security level. Encrypts all communication. Access is possible only with a URL that begins with "https://." Access attempts using an ordinary http:// URL are automatically redirected to the URL where "http://" is replaced with "https://." Enables access for both encrypted and unencrypted communication. Access is possible with https:// and http:// URLs. The former URL establishes encrypted communication and the latter establishes normal communication. IPP Security Specifies the security level. Secure Only (IPP over SSL) Encrypts all communications. Not Secure (IPP over SSL&IPP) Enables access for both encrypted and unencrypted communications. Clientside Settings Effective Encryption Certificate Verification Allow you to specify the encryption algorithm for data communication. You can use more than one algorithms at a time. When set On, verify the expiration of the server certificate at communication. If found expired, communication will fail. When set Off, the expiration will not be verified. 48 KYOCERA COMMAND CENTER