Kyocera C8100DN Command Center Guide - Page 14

COMMAND CENTER Pages Item Description Error Clear Timer Specifies the time between 5 and 495 seconds after which errors are cleared automatically. RAM Disk Mode Specifies whether to use a part of the print system memory as a RAM disk. You can specify the size of the print system memory to use for the RAM disk. If this item is On, electronic sorting is enabled and the printing speed increases. After you have changed the setting, you must restart the printing system. RAM Disk Size Specifies the size of the RAM disk. For allowable sizes, refer to the print system operation guide. After you have changed the setting, you must restart the printing system. Interrupt Clear Time This determines the time of period before the machine reverts to normal mode, after the interrupt copy mode has been engaged. The range is 5 to 459 seconds (in 5-second increments). WSD Scan Timer This determines the time of period before the machine reverts to normal mode, after WSD scan mode has been engaged. The range is 10 to 495 seconds (in 5-second increments). File Name You can change the file name for the scan data or the job name for the jobs on the Job page. Additional Information Unusable Time Setting You can add a Job Number or the Data and Time to the File Name designated above. The additional information varies depending on model. This restricts use of the machine by time of day. When turned On, the machine becomes unoperative during the time of day specified by Unusable Time. Except, the received FAXes are stored in the machine and printed after the unusable time period has been expired. Unusable Time This determines the time of period during which the machine is restricted for use. This is enabled when Unusable Time Setting is On. Basic > Defaults > Address Book > Contacts This page allows you to add, edit or delete Contacts. Adding a New Contact 1. Open the Address Book Contacts page. 2. Click Add Contact. The Address Book Contacts - Add page opens. 3. Enter the information for the address to be registered. You can specify a FAX number and i-FAX address even if the FAX System is not installed. 4. Click Submit. Editing a Contact 1. Open the Address Book Contacts page. 10 KYOCERA COMMAND CENTER